2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 213

212 UNDERSTANDING YOUR INSTRUMENT PANEL modify driving habits in order to increase fuel economy. The ECO display will toggle between ECO and ECO-ON depending on driving habits and vehicle usage. Press the Odometer / Trip Odometer / ECO (Fuel Saver Indicator) button to change the display from odometer to either of the two trip odometer settings or the "ECO" display. If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator Loose will display in the odometer display area. Tighten the fuel filler cap properly and press If equipped, some of the above warnings will be dis- Gascap Indicator the TRIP button to turn off the message. If the played in the Electronic Vehicle Information Center problem continues, the message will appear (EVIC) in the instrument cluster. Refer to "Electronic the next time the vehicle is started. Vehicle Information Center (EVIC) - If Equipped" for A loose, improperly installed, or damaged fuel filler cap further information. may also turn on the Malfunction Indicator Light (MIL). ECO / ECO-ON (Fuel Saver Indicator) - If Equipped The ECO-ON indicator will illuminate when you are driving in a fuel efficient manner and can be used to NOTE: There is also an engine hour function. This indicates the total number of hours the engine has been running. To display the engine hours on the base cluster, perform the following: Place the ignition in the ON/ RUN, but do not start the engine. With the odometer value displayed, hold the TRIP button down for a period of six seconds. The odometer will change to trip value first, then it will display the engine hour value. The engine hours will be displayed for a period of 30 seconds until the ignition is turned OFF or the engine is started.