2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 308
2011 Dodge Ram 1500 Crew Cab Manual
Page 308 highlights
STARTING AND OPERATING 307 accelerator pedal pushed all the way to the floor. Release 1500 Models the accelerator pedal and the key fob once the engine is The engine block heater cord is routed under the hood on the passenger side of the vehicle near the right head lamp running smoothly. assembly. It is located between the front grill and the If the engine shows no sign of starting after two 15radiator, but underneath the black upper seal. second periods of cranking with the accelerator pedal held to the floor, the "Normal Starting" procedure should 2500/3500 Models The engine block heater cord is routed through the grille be repeated. by the right front tow hook. After Starting The idle speed is automatically controlled and will de- It includes a removable cap that is secured by a tethered strap. It also has a c-clip that is used for storage when not crease as the engine warms up. in use for the winter months. During winter months, ENGINE BLOCK HEATER - IF EQUIPPED remove the heater cord wiring assembly from itself on The engine block heater warms the engine, and permits the c-clip. quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. grounded, three-wire extension cord. 5