2011 Dodge Ram 1500 Crew Cab Owner Manual - Page 462
2011 Dodge Ram 1500 Crew Cab Manual
Page 462 highlights
STARTING AND OPERATING 461 1. Make sure the trailer brakes are in good working Repeat Steps 5 and 6 until the GAIN setting is at a point condition, functioning normally, and properly adjusted. just below trailer wheel lockup. If towing a heavier See your trailer dealer if necessary. trailer, trailer wheel lockup may not be attainable even with the maximum GAIN setting of 10. 2. Hook up the trailer and make the electrical connections according to the trailer manufacturer's instructions. EVIC Display Messages The trailer brake control interacts with the Electronic 3. When a trailer with electric brakes is plugged in, the Vehicle Information Center (EVIC). Display messages, GAIN setting will illuminate. along with a single chime, will be displayed when a 4. Use the GAIN adjustment (+/-) buttons to increase or malfunction is determined in the trailer connection, decrease the GAIN setting to the desired starting point. A trailer brake control, or on the trailer. Refer to "Electronic GAIN setting of 6 is a good starting point for heavier Vehicle Information Center" in "Understanding Your loads. Instrument Panel" for further information. 5. In a traffic-free environment, tow the trailer on a dry, level surface at a speed of 20-25 mph (30-40 km/h) and squeeze the manual brake control lever completely. 6. If the trailer wheels lockup (indicated by squealing tires), reduce the GAIN setting; if the trailer wheels turn freely, increase the GAIN setting. 5