2015 Ducati Superbike 1299 Panigale S Owners Manual - Page 111

Note When the LAP function is active, the FLASH button takes on the dual function of high beam "FLASH" and LAP timer start / stop (new lap start indication). - Note The TRIP FUEL function always has top priority over the LAP function: in case of activation of the TRIP FUEL function with active LAP function, the LAP timer view is automatically removed and TRIP FUEL information is displayed instead. - the next time the FLASH button (3) is pressed, the instrument panel displays for 5 seconds the number and time for the just-ended lap, with a resolution of a hundredth of a second: even if the "LAP" function is not displayed, the lap is displayed for 5 seconds all the same and then the selected function will be displayed (e.g. LEAN); after these 5 seconds, the instrument panel goes back to lap timer page referred to the new current lap. the next time the FLASH button (3) or any equivalent control is pressed, the lap timer is reactivated. LAP recording If the LAP function is active, the lap time can be recorded for a total of 30 consecutive laps. Operation: when the FLASH button (3) is pressed for the first time, the instrument panel displays the lap timer with resolution of a tenth of a second (0' 00''0); If the time is never stopped, it will roll over upon reaching 9 minutes, 59 seconds and 99 hundredths; the lap timer starts counting from zero and will keep running until the lap is stopped or the recording function is disabled. Laps are numbered from 01 to 30 and are in a loop: after the first 30 laps the instrument panel will overwrite information starting from Lap 01. If the LAP function is interrupted (change to ROAD layout or temporary disabling or key-off) and then reactivated (back to TRACK layout or reactivation or key-on) but memorized laps are not deleted, lap 109