1996 Ford Aerostar Owner's Manual - Page 153

How to set the clock 1. 2. Turn the radio on. Press and hold in the "CLOCK" button, press the "SEEK" button left (b) to advance the hours and right (a) to advance the minutes. NOTE: The clock displays 12-hour time with no AM/PM indications. NOTE: On the High-Level Audio System, the clock can be set with the radio power on or off. Tape error messages Your cassette tape player is equipped to diagnose certain problems you may experience. Error codes are as follows: Error 0 - Communication error between the radio controller and the tape controller. The cassette player will eject the tape. Insert the tape again. If the same error code appears, turn the ignition off, then back on again and insert the tape. Error 1 - Possible problem cartridge. The cassette tape player will eject the tape. Insert the tape again. If the same error code appears in the display, try a different cartridge. Error 2 - Tape eject or load failure. Your cassette tape player will go into the pause mode. Push "EJCT" to eject the tape. If the tape doesn't eject, refer the problem to qualified personnel for service. 172