2012 Ford Focus Owner Guide 5th Printing - Page 154
2012 Ford Focus Manual
Page 154 highlights
Locks and Security admin keys are programmed to the vehicle, and see the total distance the vehicle has been driven with the MyKey active. MyKey restricted features Standard settings - these settings cannot be changed • Belt-Minder cannot be cleared and will not expire. The audio system will be muted whenever Belt-Minder is activated until the safety belts are buckled. Refer to the Seating and Safety Restraints chapter for a detailed description of Belt-Minder operation. • Low fuel warnings are displayed in the message center followed by a chime when the distance to empty value reaches 75 miles (120 km). • The following systems, if equipped, cannot be turned off: parking aid, blind spot information system (BLIS) with cross traffic alert and collision warning system. Optional settings - these settings can be changed • Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are displayed followed by a chime when the vehicle speed has reached 80 mph (130 km/h). • Visual warnings are displayed followed by a chime when a preselected vehicle speed of 45, 55 or 65 mph (75, 90, or 105 km/h) is exceeded. • The maximum volume of the audio system is limited to 45%. MAX VOLUME MY KEY LIMIT will be displayed in the audio system display when attempting to exceed the limited volume. • The AdvanceTrac system cannot be turned off. When this optional setting is on, the MyKey user will not be able to deactivate the system. Note: It may be beneficial to deactivate the AdvanceTrac system if the vehicle is stuck in snow, mud or sand. Create a MyKey To program MyKey on one of the keys programmed to the vehicle, insert the key that you want to make a MyKey into the ignition. For vehicles equipped with push button start, put the intelligent access key in the backup slot; see the Driving chapter for the location of the backup slot. Turn the ignition on. Use the message center buttons to do the following: 1. Get into the main menu, select Settings then MyKey by pressing OK or the > button. 2. Press OK to select CREATE. 3. Hold the OK button as prompted until you see LABEL KEY AS MYKEY. 154 2012 Focus (foc) Owners Guide, 5th Printing USA (fus)