2012 Ford Focus Owner Guide 5th Printing - Page 289

Driving When manual zoom is enabled, only the centerline will be shown. Zoom {zoom level} Rear camera delay After shifting out of R (Reverse) and into any gear other than P (Park), the image will remain until the vehicle speed reaches five mph (8 km/h). This will only occur if the rear camera delay feature is on, or until any radio button is selected. The default setting for the rear camera delay is OFF. To turn this feature on or off when the vehicle is not in R (Reverse), do the following: 1. Select Menu 2. Select Vehicle 3. Select Rear View Camera The rear camera delay options are ON and OFF. The camera lens for the reverse camera system is located on the liftgate. Keep the lens clean so the video image remains clear and undistorted. Clean the lens with a soft, lint-free cloth and non-abrasive cleaner. When towing, the reverse camera system will only see what is being towed behind the vehicle. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. Active guidelines, fixed guidelines, visual park aid alert and manual zoom features are only available when the vehicle is in R (Reverse). If the vehicle is in R (Reverse) and the liftgate is ajar, no rear video camera features will be displayed. A message will be displayed on the touchscreen if the liftgate is ajar. After activating or deactivating a rear video camera feature, the touchscreen will show a preview of the feature(s) selected. Note: If the camera system image is not clear or seems distorted, it may be covered with water droplets, snow, mud or any other substance. If this occurs, clean the camera lens before using the camera system. 289 2012 Focus (foc) Owners Guide, 5th Printing USA (fus)