2014 Ford C-MAX Energi Owner Manual - Page 108
2014 Ford C-MAX Energi Manual
Page 108 highlights
Climate Control F Recirculated air: Press to switch from outside air to recirculated air. When you select recirculated air, the air currently in the passenger compartment recirculates. This may reduce the time needed to cool the interior (when used with A/C) and may reduce unwanted odors from entering your vehicle. Recirculated air turns on automatically when you select MAX A/C, or manually in any airflow mode except defrost. Recirculated air may turn off automatically in all airflow modes except MAX A/C to reduce fog potential. Press the control again to switch off recirculated air and allow fresh air to enter into the vehicle. Defrost: Distributes air through the windshield defroster vents and demister vents. The system automatically provides outside air to reduce window fogging. Press again to switch off defrost mode. Instrument panel: Press to distribute air through the instrument panel vents. Press again to switch off panel mode. Floor: Distributes air through the demister vents and front and rear seat floor vents. Press again to switch off floor mode. A/C: Press to switch air conditioning on or off. Use with recirculated air to improve cooling performance and efficiency. Air conditioning also turns on automatically in some modes. Single Zone Temperature Control In this mode, the climate control system links the temperature settings for both the driver's side and passenger's side. If you adjust the setting using the rotary control on the driver 's side, the system adjusts the temperature to the same setting on the passenger's side. Dual Zone Temperature Control Select a temperature for the passenger 's side using the rotary control on the passenger's side. Single zone temperature control automatically switches off. The temperature on the driver 's side remains unchanged. You can now adjust the driver's side and passenger's side temperatures independently. The display shows the temperature settings for each side. G H I J Temperature Control E133115 You can set the temperature between 60°F (15.5°C) and 85°F (29.5°C) in steps of 1°F (0.5°C). In position LO, 59°F (15°C), the system switches to permanent cooling. In position HI, 86°F (30°C), the system switches to permanent heating. 106 C-MAX (CCG)