2014 Ford C-MAX Energi Owner Manual - Page 191
2014 Ford C-MAX Energi Manual
Page 191 highlights
Roadside Emergencies 2. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. Ensure that vent caps are tight and level. 3. Turn the heater fan on in both vehicles to protect from any electrical surges. Turn all other accessories off. Connecting the Jumper Cables Your vehicle has a 12-volt battery that has two prongs accessible from under the hood. Your vehicle can be jumped the same way conventional vehicles can by using these prongs. The illustration below shows the two connector prongs used for jump-starting your vehicle. A B E163911 A. Positive prong (+) B. Negative prong (-) Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Note: Remove the red cap from the positive prong (A) on your vehicle before connecting the cables. 189 C-MAX (CCG)