2014 Ford C-MAX Energi Owner Manual - Page 245
2014 Ford C-MAX Energi Manual
Page 245 highlights
Wheels and Tires Note: After you use the sealant, an authorized Ford dealer must replace the tire pressure monitoring system sensor and the valve stem on the wheel. Check the tire pressure any time within the 120 miles (200 kilometers) by performing the procedure from Second stage: Checking tire pressure listed previously. Removal of the Sealant Canister from the Kit E144622 4. Adjust the tire to the recommended inflation pressure from the tire label located on the driver's door or door jamb area. You have to check the tire pressure with the compressor in the OFF position to get the correct tire pressure reading. 5. Turn the compressor off by pressing the off button. 6. Unplug the hoses, re-install the valve cap on the tire and return the kit to the stowage area. E144623 1. What to Do after the Tire has Been Sealed After using the kit to seal your tire, replace the sealant canister and clear tube (hose). Obtain and replace the sealing compound and spare parts at an authorized Ford Motor Company dealership or tire dealer. You can dispose empty sealant bottles at home. However, liquid residue from the sealing compound should be disposed by your local Ford Motor Company dealership or tire dealer, or in accordance with local waste disposal regulations. Note: After you use the sealing compound, the maximum vehicle speed is 50 mph (80 km/h) and the maximum driving distance is 120 miles (200 kilometers). Inspect the sealed tire immediately. Unwrap the clear tube from the compressor housing. E144624 2. Locate the yellow cap at the end of the clear tube. 243 C-MAX (CCG)