2014 Ford C-MAX Energi Owner Manual - Page 150
2014 Ford C-MAX Energi Manual
Page 150 highlights
High Voltage Battery 5. Pull the handle toward you and remove the service disconnect from the vehicle to disable the high-voltage battery. Reactivating the High-Voltage Battery Note: If you have manually disconnected your high-voltage shut off circuit, you will need to reconnect the circuit before you can reactivate it. The system will detect if the electrical system is safe and turn on automatically. Charging Equipment CHARGING THE HIGH VOLTAGE BATTERY (IF EQUIPPED) CHARGING THE HIGH-VOLTAGE BATTERY (ENERGI VEHICLES) WARNINGS Do not use the 120-volt convenience cord with an extension cord or adapter. In Canada, do not use the 120-volt convenience cord in commercial garages. This equipment has arcing or sparking parts, do not expose to flammable vapors. Position this equipment at least 18 inches (80 millimeters) above the floor. E78097 Your vehicle is equipped with a standard 120-volt convenience cord located in the floor compartment behind the driver seat. Note: The 120-volt convenience cord allows you to charge the high-voltage battery using a standard 120-volt household outlet. Using the standard 120-volt convenience cord takes approximately 7 hours to completely charge from an empty battery. E145429 Ford recommends upgrading to the optional 240-volt charging station for faster more efficient charging. Using a 240-volt charging station will take approximately 2 ½ hours to fully charge an empty battery. 148 C-MAX (CCG)