2014 Honda Civic 2014 Civic Navigation Manual - Page 223

System Initialization The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected). 1. Set the power mode to ON, and turn on the audio system. 2. Press and hold the audio system power button for more than two seconds. u The system is reactivated when the system's control unit recognizes that the system is in your vehicle. If the control unit fails to recognize, Enter Code appears on the navigation screen. 3. Enter the security code. u If you do not enter the security code correctly after 10 tries, leave the system for one hour before trying again, or visit a dealer to have the system reset. In the U.S., you can register the security code on Honda Owners (owners.honda.com). To find information on how to retrieve the serial number and obtain the code, visit  radio-navicode.honda.com. Acquiring GPS Information Depending on the length of time the power was interrupted, your system may require GPS initialization. Entering the Security Code Find the navigation system's security code and serial number label in your Owner's Manual kit. Do not store the label in your vehicle. If you lose the label, you must first retrieve the serial number, and then obtain the code. You can find out about your serial number and security code from a dealer. Reference Information If initialization is not necessary, the system proceeds directly to the Startup Confirmation screen. If the system fails to locate a sufficient number of satellites to locate your position within 10 minutes, the following screen is displayed. 222