2010 Infiniti FX50 Owner's Manual - Page 111

position and the ignition switch in the ACC, OFF or LOCK position. or When the headlight switch is in the position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch has been pushed to the OFF position. When the headlight switch remains in the or position after the lights automatically turn off, the lights will turn on when the ignition switch is pushed to the ON position. SIC2941 SIC3269 Be sure not to put anything on top of the photo sensor A located on the top of the instrument panel. The photo sensor controls the autolight; if it is covered, the photo sensor reacts as if it is dark and the headlights will illuminate. Headlight beam select 1 To select the low beam, put the lever in the neutral position as shown. To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. Pulling the lever toward you will flash the headlight high beam even when the headlight switch is in the OFF position. CAUTION ● When you turn on the headlight switch again after the lights automatically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise the battery will be discharged. ● Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically. 2 3 Battery saver system A chime will sound when the driver side door is or opened with the light switch in the Instruments and controls 2-37