2010 Infiniti FX50 Owner's Manual - Page 148

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver's or front passenger's) A or the lift gate request switch B within the range of operation. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see "Setting hazard indicator and horn mode" later in this section. *2: Doors will not lock with the Intelligent Key while any door is open. *3: Doors will not lock by pushing the door handle request switch with the Intelligent Key inside the vehicle. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key. Unlocking doors and fuel-filler door 1. Push the door handle request switch (driver's or front passenger's) A or the lift gate request switch B once while carrying the Intelligent Key with you. When you approach the vehicle with the Intelligent Key, the puddle light and the passenger cabin illumination will illuminate and stay on for a short period of time. (See "WELCOME LIGHT" in the "2. Instruments and controls" section.) 2. The hazard indicator flashes once and outside chime sounds once. The corresponding door will unlock. The fuel-filler door will also unlock when the driver's door handle request switch is pushed. 3. Push the door handle request switch again within 60 seconds. Locking doors and fuel-filler door SPA2467 1. Move the selector lever to the P (Park) position, push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you.*1 2. Close all the doors.*2 3. Push the door handle request switch (driver's or front passenger's) A or the lift gate request switch B while carrying the Intelligent Key with you.*3 4. All the doors and fuel-filler door will lock. 5. The hazard indicator flashes twice and the outside chime sounds twice. *1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position. SPA2410 3-10 Pre-driving checks and adjustments