2010 Infiniti FX50 Owner's Manual - Page 330

The ignition lock is designed so that the ignition switch position cannot be switched to LOCK until the selector lever is moved to the P (Park) position. When the ignition switch cannot be pushed toward the LOCK position, proceed as follows: 1. Move the selector lever into the P (Park) position. 2. Push the ignition switch to the OFF position. The ignition switch position indicator will not illuminate. 3. Open the door. The ignition switch will change to the LOCK position. The selector lever can be moved from the P (Park) position if the ignition switch is in the ON position and the brake pedal is depressed. In order for the steering wheel to be locked, it must be turned about 1/8 of a right or left turn from the straight up position. To lock the steering wheel, push the ignition switch to the OFF position. To unlock the steering wheel, push the ignition switch. If the steering lock release malfunction indicator appears on the dot matrix liquid crystal display, push the push-button ignition switch again while lightly turning the steering wheel right and left. (See "DOT MATRIX LIQUID CRYSTAL DISPLAY" in the "2. Instruments and controls" section.) If the battery of the vehicle is discharged, the push-button ignition switch cannot be turned from the LOCK position. Some indicators and warnings for operation are displayed on the dot matrix liquid crystal display between the speedometer and tachometer. (See "DOT MATRIX LIQUID CRYSTAL DISPLAY" in the "2. Instruments and controls" section.) PUSH-BUTTON IGNITION SWITCH POSITIONS LOCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the port. SSD0910 When the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change as follows: ● Push center once to change to ACC. ● Push center two times to change to ON. ● Push center three times to change to OFF. (No position illuminates.) ● Push center four times to return to ACC. ● Open or close any door to return to LOCK during the OFF position. The ignition switch is equipped with an antitheft steering lock device. ACC (Accessories) This position activates electrical accessories such as the radio, when the engine is not running. ON (Normal operating position) This position turns on the ignition system and electrical accessories. 5-10 Starting and driving