2010 Infiniti FX50 Owner's Manual - Page 345
2010 Infiniti FX50 Manual
Page 345 highlights
● When the Intelligent Cruise Control (ICC) approach warning occurs. ● When the hazard warning flashers are operated. ● When driving on a curve at high speed. After the above conditions have finished and the necessary operating conditions are satisfied, the LDP brake control assist function will resume. Condition C : Under the following conditions, a beep will sound and the LDP system will be canceled automatically. The LDP ON indicator light will blink in green, and the LDP system cannot be activated: ● When the VDC system (except TCS function) or ABS operates. ● When the VDC system is turned off. ● When the SNOW mode switch is turned on. Action to take: When the above conditions no longer exist, turn off the LDP system. Push the LDP switch again to turn the LDP system back on. Temporary disabled status at high temperature : If the vehicle is parked in direct sunlight under high temperature conditions (over approximately 104°F (40°C)) and then the LDP system is turned on, the LDP system may be deactivated automatically. The LDP ON indicator (green) will blink. When the interior temperature is reduced, the system will resume operating automatically and the LDP ON indicator will stop blinking. SSD0453 LANE CAMERA UNIT MAINTENANCE The lane camera unit 1 for the LDW/LDP system is located above the inside mirror. To keep the proper operation of the LDW/LDP systems and prevent a system malfunction, be sure to observe the following: ● Always keep the windshield clean. ● Do not attach a sticker (including transparent material) or install an accessory near the camera unit. ● Do not place reflective materials, such as white paper or a mirror, on the instrument panel. The reflection of sunlight may adversely affect the camera unit's capability of detecting the lane markers. Starting and driving 5-25