2010 Infiniti FX50 Owner's Manual - Page 396

BRAKE ASSIST BRAKE ASSIST When the force applied to the brake pedal exceeds a certain level, the Brake Assist is activated generating greater braking force than a conventional brake booster even with light pedal force. ● The pre-pressure function ceases when the following conditions are met: a) When the driver depresses the accelerator pedal or the brake pedal. b) If the driver does not operate the accelerator or brake pedal within approximately 1 second. WARNING The Brake Assist is only an aid to assist braking operation and is not a collision warning or avoidance device. It is the driver's responsibility to stay alert, drive safely and be in control of the vehicle at all times. SSD0338 ● The sensor will not detect: a) Pedestrians or objects in the roadway b) Oncoming vehicles in the same lane c) Motorcycles traveling offset in the travel lane as illustrated PREVIEW FUNCTION (Intelligent Cruise Control system equipped models) When the Preview Function identifies the need to apply emergency braking by sensing a vehicle ahead in the same lane and the distance and relative speed from it, it applies the brake pre-pressure before the driver depresses the brake pedal and helps improve brake response by reducing pedal free play. ● This system will not operate when the vehicle is moving at approximately 20 MPH (32 km/h) or less. WARNING ● This system is only an aid to assist braking operation and is not a collision warning or avoidance device. It is the driver's responsibility to stay alert, drive safely and be in control of the vehicle at all times. 5-74 Starting and driving