2014 Jeep Wrangler Owner Manual - Page 24

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Panic Alarm and the Vehicle Security Alarm are quite different. Please take a moment to activate the Panic Alarm and the Vehicle Security Alarm to hear the differences in the horn. In case one should go off in the future, you will need to know which mode has been activated in order to deactivate it. Rearming The System If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn off the horn after three minutes, turn off all of the visual signals after 15 minutes, and then the Vehicle Security Alarm will rearm itself. the instrument cluster) will flash rapidly for about 16 seconds to signal that the Vehicle Security Alarm is arming. During this 16-second arming period, opening any door or the swing gate will cancel the arming. If the Vehicle Security Alarm is successfully set, the Vehicle Security Light will flash at a slower rate to indicate the Vehicle Security Alarm is armed. To Disarm The System To disarm the Vehicle Security Alarm, you will need to press the UNLOCK button on the RKE transmitter, or turn the ignition switch to the ON/RUN position. If something has triggered the Vehicle Security Alarm in your absence, the horn will sound three times and the To Arm The System exterior lights blink three times when you unlock the The Vehicle Security Alarm will set when you use the doors. Check the vehicle for tampering. Remote Keyless Entry (RKE) transmitter to lock the doors The Vehicle Security Alarm is designed to protect your and swing gate, or when you use the power door lock vehicle; however, you can create conditions where the switch while the door is open. After all the doors are Vehicle Security Alarm will arm unexpectedly. If you locked and closed, the Vehicle Security Light (located on