2014 Jeep Wrangler Owner Manual - Page 322

320 UNDERSTANDING YOUR INSTRUMENT PANEL button to increase the variance one step. Repeat as 3. Release the RESET button, then press and hold again for approximately 10 seconds, until the direction is necessary until the desired variance is achieved. displayed, with the CAL indicator on continuously in NOTE: The factory default zone is 8. During programthe display. ming, the zone value will wrap around from zone 15 to 4. To complete the compass calibration, drive the vehicle zone 1. in one or more complete 360-degree circles, under Manual Compass Calibration 5 mph (8 km/h) in an area free from power lines and If the compass appears erratic, inaccurate or abnormal, large metallic objects, until the CAL indicator turns you may wish to calibrate the compass. Prior to calibratoff. The compass will now function normally. ing the compass, make sure the proper zone is selected. NOTE: 1. Start the engine and leave the transmission in the • A good calibration requires a level surface and an PARK position. environment free from large metallic objects such as 2. Press and hold the RESET button (for approximately buildings, bridges, underground cables, railroad 10 seconds) until the current variance zone number is tracks, etc. displayed. • Magnetic materials should be kept away from the top of the center of the instrument panel. This is where the compass sensor is located.