2014 Jeep Wrangler Owner Manual - Page 401

UNDERSTANDING YOUR INSTRUMENT PANEL 399 Temperature Control NOTE: • The temperature setting can be adjusted at anytime Dial in the temperature you would like without affecting automatic operation. the system to maintain by rotating the • Pressing the Air Conditioning Control button while in Temperature Control knob. Once the AUTO mode will cause the LED in the control button comfort level is selected, the system will to flash three times and then turn off. This indicates maintain that level automatically using that the system is in AUTO mode and requesting the the heating system. Should the desired air conditioning is not necessary. comfort level require air conditioning, the system will automatically make the adjustment. • If your air conditioning performance seems lower than expected, check the front of the A/C condenser located You will experience the greatest efficiency by simply in front of the radiator for an accumulation of dirt or allowing the system to function automatically. Selecting insects. Clean with a gentle water spray from behind the "O" (OFF) position on the blower control stops the the radiator and through the condenser. Fabric front system completely and closes the outside air intake. fascia protectors may reduce airflow to the condenser, The recommended setting for maximum comfort is 72° F reducing air conditioning performance. (22° C) for the average person; however, this may vary. 4