2014 Jeep Wrangler Owner Manual - Page 28

26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pressing the RKE transmitter LOCK button while you are inside of the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the RKE transmitter UNLOCK button to deactivate the Vehicle Security Alarm. To Lock The Doors And Swing Gate Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signals will flash and the horn will chirp once to acknowledge the lock signal. Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signals will flash to 5. If the desired programming was not achieved or to acknowledge the lock signal. reactivate this feature, repeat the above steps. Sound Horn On Lock NOTE: Pressing the RKE transmitter LOCK button while you are inside of the vehicle will activate the Vehicle This feature will cause the horn to chirp when the doors Security Alarm. Opening a door with the Vehicle Security are locked with the RKE transmitter. This feature can be Alarm activated will cause the alarm to sound. Press the turned on or turned off. To change the current setting, RKE transmitter UNLOCK button to deactivate the Ve- proceed as follows: hicle Security Alarm. • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information.