2014 Jeep Wrangler Owner Manual - Page 27

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles not equipped with the EVIC, the Remote Unlock feature can be enabled or disabled by performPress and release the RKE transmitter UNLOCK button ing the following steps: once to unlock the driver's door only, or twice to unlock all the doors and swing gate. When the RKE transmitter 1. Press and hold the LOCK button on a programmed UNLOCK button is pressed, the Illuminated Entry will RKE transmitter. initiate and the turn signal lights will flash twice. 2. Continue to hold the RKE transmitter LOCK button Remote Key Unlock On First Press for at least four seconds, but not longer than 10 seconds, then press and hold the RKE transmitter This feature lets you program the system to unlock either UNLOCK button. the driver's side, or all doors and swing gate on the first To Unlock The Doors And Swing Gate press of the UNLOCK button on the RKE transmitter. 3. Release both buttons at the same time. • For vehicles equipped with an Electronic Vehicle In- 4. Test this feature while outside of the vehicle by formation Center (EVIC), refer to "Electronic Vehicle pressing the LOCK/UNLOCK button on the RKE Information Center (EVIC)/Personal Settings transmitter. (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. 2