2014 Jeep Wrangler Owner Manual - Page 406

404 UNDERSTANDING YOUR INSTRUMENT PANEL • Extended use of recirculation may cause the windows to fog. If the interior of the windows begins to fog, press the Recirculation button to return to outside air. Some temp/humidity conditions will cause captured interior air to condense on windows and hamper visibility. For this reason, the system will not allow recirculation to be selected while in defrost mode. Attempting to use recirculation while in this mode will cause the LED in the control button to blink and then turn off. these conditions are present, and the Recirculation button is pressed, the indicator will flash and then turn off. This tells you that you are unable to go into Recirculation mode at this time. If you would like the system to go into Recirculation mode, you must first move the Mode knob to Panel, Bi-Level, Floor, or Mix and then press the Recirculation button. This feature reduces the possibility of window fogging. Operating Tips • Most of the time, when in Automatic Operation, you NOTE: Refer to the chart at the end of this section for can temporarily put the system into Recirculation suggested control settings for various weather condimode by pressing the Recirculation button. However, tions. under certain conditions, while in Automatic mode, the system is blowing air out the defrost vents. When