2014 Jeep Wrangler Owner Manual - Page 318

316 UNDERSTANDING YOUR INSTRUMENT PANEL 28. Electronic Stability Control (ESC) OFF Indicator If the light continues to flash when the engine is running, Light - If Equipped immediate service is required and you may experience reduced performance, an elevated/rough idle, or engine This light indicates the Electronic Stability Constall and your vehicle may require towing. The light will trol (ESC) is off. come on when the ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an 29. Electronic Throttle Control (ETC) Light authorized dealer. This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a 30. Electronic Vehicle Information Center (EVIC) Disproblem is detected while the engine is run- play / Compass Mini-Trip Computer Display - If ning, the light will either stay on or flash depending on Equipped the nature of the problem. Cycle the ignition key when When the appropriate conditions exist, this display the vehicle is safely and completely stopped and the shift shows the Electronic Vehicle Information Center (EVIC) lever is placed in the PARK position. The light should messages. For further information, refer to "Electronic turn off. If the light remains on with the engine running, Vehicle Information Center". your vehicle will usually be drivable; however, see an When the appropriate conditions exist, this display authorized dealer for service as soon as possible. shows the Mini-Trip Computer messages. Refer to "MiniTrip Computer" for further information.