2015 Kawasaki MULE 4010 Trans4x4 Owners Manual - Page 105

2015 Kawasaki MULE 4010 Trans4x4 Manual

Page 105 highlights

104 MAINTENANCE AND ADJUSTMENT away the remaining dust by applying com• Blow pressed air from the inside to the outside (from the • • clean side to the dirty side). Inspect the element material for damage. If any part of the element is damaged, the element must be replaced. Reset the air filter restriction gauge (push its button). Evaporative Emission Control System This system routes fuel vapors from the fuel system into the running engine or stores the vapors in a canister when the engine is stopped. Although no adjustments are required, a thorough visual inspection must be made at the intervals specified by the "Periodic Maintenance Chart". j Dust and/or Water Inspection mulated inside. open the drain hose on the bottom of the air • Push cleaner housing to expel dust and/or water accu- Inspection that the hoses are securely connected. • Check any kinked, deteriorated, or damaged • Replace hoses. A. Drain Hose

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152

104
MAINTENANCE AND ADJUSTMENT
j
Blow away the remaining dust by applying com-
pressed air from the inside to the outside (from the
clean side to the dirty side).
Inspect the element material for damage. If any
part of the element is damaged, the element must
be replaced.
Reset the air filter restriction gauge (push its but-
ton).
Dust and/or Water Inspection
Push open the drain hose on the bottom of the air
cleaner housing to expel dust and/or water accu-
mulated inside.
A. Drain Hose
Evaporative Emission Control System
This system routes fuel vapors from the fuel sys-
tem into the running engine or stores the vapors in
a canister when the engine is stopped. Although no
adjustments are required, a thorough visual inspec-
tion must be made at the intervals specified by the
“Periodic Maintenance Chart”.
Inspection
Check that the hoses are securely connected.
Replace any kinked, deteriorated, or damaged
hoses.