2015 Kawasaki MULE 4010 Trans4x4 Owners Manual - Page 43
2015 Kawasaki MULE 4010 Trans4x4 Manual
Page 43 highlights
42 GENERAL INFORMATION Raising & Lowering the Cargo Bed The cargo bed can be tilted by releasing the latches on each side, and then lifting the bed with the handgrips. Before tilting the cargo bed, park on a firm level surface and set the parking brake. Support the bed in the tilted position with the supporting rod provided on the bottom of the cargo bed. Do not drive the vehicle with the front end of the cargo bed raised or unlatched. To lower the bed, check to be sure the area under the front of the cargo bed is clear, then carefully lower the bed into position. Check that the both latches have locked the bed into place. Do not leave the cargo bed unlatched. j WARNING Reduced clearance between cargo bed and ROPS can cause hand injury. Do not hold ROPS in the location of the label when raising or lowering the cargo bed. 2. 3. A. Stopper pin B. Rear Seat Push the rear seat back forward. Release the latches on both sides. With the Cargo Bed Shortened Condition 1. Pull the rear seat stopper pin on the left side.