2015 Kawasaki MULE 4010 Trans4x4 Owners Manual - Page 88
2015 Kawasaki MULE 4010 Trans4x4 Manual
Page 88 highlights
MAINTENANCE AND ADJUSTMENT 87 Engine Oil In order for the engine to function properly, maintain the engine oil at the proper level, and change the oil and oil filter in accordance with the Periodic Maintenance Chart. Not only do dirt and metal particles collect in the oil, but the oil itself loses its lubricative quality if used too long. the vehicle has just been used, wait several min• If utes for all the oil to drain down. the vehicle on level ground. • Park Pull up the dipstick out of the dipstick tube, wipe • it dry, and insert the dipstick till it bottoms into the tube securely. ○It NOTE WARNING Vehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident, and injury. Check the oil level before each use and change the oil and filter according to the periodic maintenance chart in the owner's manual. is necessary to match indent of the dipstick with the mark on the tube to measure the correct amount of oil. j Oil Level Inspection the oil has just been changed, start the engine • If and run it for several minutes at idle speed. This fills the oil filter with oil. Stop the engine, then wait several minutes until the oil settles. NOTICE Racing the engine before the oil reaches every part can cause engine damage. A. Mark B. Groove C. Dipstick