2015 Kawasaki MULE 4010 Trans4x4 Owners Manual - Page 89
2015 Kawasaki MULE 4010 Trans4x4 Manual
Page 89 highlights
88 MAINTENANCE AND ADJUSTMENT out the dipstick and check the oil level. The • Pull oil level should be between the "F" (Full) and "L" (Low) lines on the dipstick. Oil and/or Oil Filter Change NOTE up the engine thoroughly and then stop the • Warm engine. ○In 4-person mode, first fold the rear seat and push its assembly into the stored position, and then raise the cargo bed and support it with the rod. ○In 2-person mode, raise the cargo bed and support it with the rod. j • Remove the oil filler cap. A. Dipstick B. "F" (Full) Line C. "L" (Low) Line the dipstick until it bottoms into the tube • Reinsert securely. the oil level is too high, remove the excess oil, • If using a syringe or other suitable device. the oil level is too low, unscrew the oil filler cap • If and add the correct amount of oil. Use the same A. Oil Filler Cap • type and brand of oil that is already in the engine. Install the filler cap. an oil pan beneath the engine. • Place Remove the drain plug. •