2015 Kawasaki MULE 4010 Trans4x4 Owners Manual - Page 94
2015 Kawasaki MULE 4010 Trans4x4 Manual
Page 94 highlights
MAINTENANCE AND ADJUSTMENT 93 Oil Change ○Before draining the oil, warm it up by running the vehicle. Warm oil drains easily and picks up any sediment. the front final gear case guard. • Remove With the vehicle • gear case. level, place an oil pan beneath the • Remove the filler cap and drain plug. NOTE j WARNING A. B. C. D. Front Final Gear Case Filler Opening Bottom Thread Drain Plug Gear case oil is a toxic substance. Dispose of used oil properly. Contact your local authorities for approved disposal methods or possible recycling. the filler cap and tighten it to the specified • Install torque. Tightening Torque Filler Cap: 29 N·m (3.0 kgf·m, 21 ft·lb) WARNING Oil on tires can make them slippery which can cause an accident and injury. When draining or filling the gear case, be careful that no oil gets on the tires or rims. Clean off any oil that inadvertently gets on them with soap and water. the oil has completely drained out, install the • After drain plug and gasket. If the gasket is damaged, replace it with a new one. Tightening Torque Drain Plug: 20 N·m (2.0 kgf·m, 15 ft·lb) ○Use the same type and brand of oil that is already in the gear case. NOTE