Aastra 6867i 6867i User Guide - Page 65
State-Based Softkeys, In the Aastra Web UI
View all Aastra 6867i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Configuring Softkeys State-Based Softkeys On the 6867i's bottom softkeys, you can configure a specific state to display when a softkey is being used. The following table describes the states available to configure for the softkeys. State Idle Connected Incoming Outgoing Busy Description The phone is not being used. The current line is in an active call (or the call is on hold). The phone is ringing. The user is dialing a number, or the far-end is ringing. The current line is busy because the line is in use or the line is set as DND. The following table identifies the applicable default states for each softkey type on the IP phone. Softkey Type None Speed Dial DND XML Flash Sprecode Park Pickup Last Call Return Call Forward Speed Dial/Xfer Speed Dial/Conf Directory Callers List Redial Conference Transfer Intercom Phone Lock Paging Empty Default States All states disabled. Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy All states disabled. Connected Connected Idle, Outgoing Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy All states disabled. All states disabled. Idle, Connected, Incoming, Outgoing, Busy In the Aastra Web UI, the operational states for each softkey display as enabled. To disable a state, simply uncheck the box for the respective state. 41-001524-00 REV00 - 04.2014 59