Acer Altos 500 aa500ug.pdf - Page 24
Post-installation Instructions, correct jumper settings.
![]() |
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1.5.3 Post-installation Instructions Observe the following procedures after installing a system component: 1. Check that the components are installed according to the instructions in their respective sections. 2. Make sure you have set all the required jumpers. See section 1.3.2 for the correct jumper settings. 3. Replace any expansion boards or peripherals that you removed earlier. 4. Replace the system cover. 5. Connect the necessary cables and turn on the system. Altos 500 Series User's Guide
![](/manual_guide/products/acer-computers-altos-500-aa500ugpdf-76fe80f/24.png)
Altos 500 Series User’s Guide
1.5.3
Post-installation Instructions
Observe the following procedures after installing a system component:
1.
Check that the components are installed according to the instructions in their
respective sections.
2.
Make sure you have set all the required jumpers.
See section 1.3.2 for the
correct jumper settings.
3.
Replace any expansion boards or peripherals that you removed earlier.
4.
Replace the system cover.
5.
Connect the necessary cables and turn on the system.