Acer Altos 500 aa500ug.pdf - Page 82
Table 3-1, Default Settings for SCSI Controller and All Devices, Default Value
![]() |
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table 3-1 Default Settings for SCSI Controller and All Devices Global Settings for SCSI Controller and All Devices Host Adapter SCSI ID SCSI Parity Checking Host Adapter SCSI Termination Boot Channel/ Boot SCSI I/O Host Adapter BIOS1 Support Removable Disks Under BIOS as Fixed Disks Extended BIOS Translation for DOS Drives > 1 Gbyte Display Message During BIOS Initialization BIOS Support for Bootable CD-ROM BIOS Support for Int13 Extensions Individual Settings for Each SCSI Device Initiate Wide Negotiation Maximum Sync Transfer Rate Enable Disconnection Send Start Unit Command1 Initiate Wide Negotiation 1 Settings are valid only if host adapter BIOS is enabled. 2 Do not change this setting from the default. Default Value 7 Enabled Automatic A/0 (zero) Enabled Boot only Enabled2 Enabled Enabled Enabled Default Value Yes 80 MBytes/sec. Yes Yes Yes Altos 500 Series User's Guide
![](/manual_guide/products/acer-computers-altos-500-aa500ugpdf-76fe80f/82.png)