Acer Altos 500 aa500ug.pdf - Page 88
Enabled, Enter, SCSI Parity Checking Selection
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
SCSI Parity Checking Select this option to enable or disable SCSI Parity Checking on the SCSI controller. The figure below displays your choices. The default setting is Enabled. Adaptec AHA-3950U2B SCSISelect (TM) Utility AHA-3950U2B at Bus:Device 01:06h Configuration SCSI Bus Interface Definitions Host Adapter SCSI ID 7 SCSI Parity Checking Enabled Host Adapter SCSI Termination Automatic Additional Boot Options Device Options ........*...E..n..a..b..l.e..d............ Press SCSI Device Configuration D...i.s..a..b.l.e..d Press Advanced Configuration Options Press - Reset to Host Adapter Defaults * Arrow keys to move cursor, to select option, to exit ( =default) Figure 3-5 SCSI Parity Checking Selection The SCSI controller always checks parity when reading from the SCSI bus to verify the correct transmission of data from your SCSI devices. You should disable SCSI Parity Checking if any attached SCSI devices do not support SCSI parity. (Most currently available SCSI devices do support SCSI parity.) Use the cursor (↑ ↓) and Enter keys to make selections. Press Esc at any time to return to the previous menu. Altos 500 Series User's Guide