Acer Altos 500 aa500ug.pdf - Page 44
Floppy Drive A, IDE Primary Channel Master, IDE CD-ROM
![]() |
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2.2.5 Floppy Drive A This parameter specifies the system's current diskette drive A settings. For information on how to configure the floppy drives, see section 2.4.1. 2.2.6 Floppy Drive B This parameter specifies the system's current diskette drive B settings. For information on how to configure the floppy drives, see section 2.4.1. 2.2.7 IDE Primary Channel Master This parameter specifies the current configuration of the IDE device connected to the master port of the primary IDE channel. For information on how to configure the IDE drives, see section 2.4.2. The default setting is IDE CD-ROM. 2.2.8 IDE Primary Channel Slave This parameter specifies the current configuration of the IDE device connected to the slave port of the primary IDE channel. For information on how to configure the IDE drives, see section 2.4.2. The default setting is None. 2.2.9 IDE Secondary Channel Master This parameter specifies the current configuration of the IDE device connected to the master port of the secondary IDE channel. For information on how to configure the IDE drives, see section 2.4.2. The default setting is None. 2.2.10 IDE Secondary Channel Slave This parameter specifies the current configuration of the IDE device connected to the slave port of the secondary IDE channel. For information on how to configure the IDE drives, see section 2.4.2. The default setting is None. Altos 500 Series User's Guide
![](/manual_guide/products/acer-computers-altos-500-aa500ugpdf-76fe80f/44.png)