Acer Altos 500 aa500ug.pdf - Page 51
Cylinder, Setting this parameter also sets the Cylinder, Head, Sector, and Size parameters.
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
The following screen appears if you select any of the IDE Drive parameters: IDE Primary/Secondary Channel Master/Slave Page 1/1 Device Type IDE CD-ROM ] Used as Cylinder XXXX ] Head XXXX ] Sector XXXX ] Size XXXX ] MB Hard Disk Size > 504MB Auto ] *Hard Disk Block Mode Auto ] *Advanced PIO Mode Auto ] *Hard Disk 32-Bit Access Enabled ] *DMA Transfer Mode Auto ] *CD-ROM Drive DMA Mode Disabled] ↑↓ = Move Highlight Bar, → ← = Change Setting, F1 = Help The above parameters marked with (*) will only appear if you access the advanced configuration level in the Main Menu. Please refer to section 2.1 for more information. Type This parameter lets you specify the type of hard disk installed in your system. If you want BIOS to automatically configure your hard disk, select Auto. If you know your hard disk type, you can enter the setting manually. Setting this parameter also sets the Cylinder, Head, Sector, and Size parameters. Cylinder This parameter specifies the number of cylinders of your hard disk, and is automatically set depending on your Type parameter setting. Chapter 2 - BIOS Utility 2-13