Acer Altos 500 aa500ug.pdf - Page 63

Num Lock After Boot, Memory Test, Configuration Table, Enabled, Disabled

Get Acer Altos 500 PDF manuals and user guides View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

2.7.5 Num Lock After Boot This parameter allows you to activate the Num Lock function upon booting. The default setting is Enabled. 2.7.6 Memory Test When set to Enabled, this parameter allows the system to perform a RAM test during the POST routine. When set to Disabled, the system detects only the memory size and bypasses the test routine. The default setting is Disabled. 2.7.7 Configuration Table This parameter allows you to enable or disable the appearance of the configuration table after POST but before booting. The configuration table gives a summary of the hardware devices and settings that BIOS detected during POST. The default setting is Enabled. Chapter 2 - BIOS Utility 2-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
Chapter 2 - BIOS Utility
2-25
2.7.5
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon booting.
The
default setting is
Enabled
.
2.7.6
Memory Test
When set to
Enabled
, this parameter allows the system to perform a RAM test
during the POST routine.
When set to
Disabled
, the system detects only the
memory size and bypasses the test routine.
The default setting is
Disabled.
2.7.7
Configuration Table
This parameter allows you to enable or disable the appearance of the configuration
table after POST but before booting.
The configuration table gives a summary of
the hardware devices and settings that BIOS detected during POST. The default
setting is
Enabled
.