Acer Altos 500 aa500ug.pdf - Page 45
Total Memory, Serial Port 1, Parallel Port, PS/2 Mouse, 1st Bank/2nd Bank/3rd Bank
![]() |
View all Acer Altos 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2.2.11 Total Memory This parameter specifies the total amount of onboard memory. The memory size is automatically detected by BIOS during the POST. If you install additional memory, the system automatically adjusts this parameter to display the new memory size. 1st Bank/2nd Bank/3rd Bank The 1st Bank, 2nd Bank, and 3rd Bank parameters indicate the type and size of DRAM installed in DIMM sockets 1, 2, and 3 respectively. The None setting indicates that there is no DRAM installed. For the location of the DIMM sockets, refer to Figure 1-1. 2.2.12 Serial Port 1 This parameter shows the serial port 1 address and IRQ setting. The default setting is 3F8h, IRQ 4. 2.2.13 Serial Port 2 This parameter shows the serial port 2 address and IRQ setting. The default setting is 2F8h, IRQ 3. 2.2.14 Parallel Port This parameter shows the parallel port address and IRQ setting. The default setting is 378h, IRQ 7. 2.2.15 PS/2 Mouse The BIOS utility automatically detects if there is a pointing device connected to your system. If there is, this parameter displays the Installed setting. Otherwise, this is set to None. The default setting is Installed. Chapter 2 - BIOS Utility 2-7
![](/manual_guide/products/acer-computers-altos-500-aa500ugpdf-76fe80f/45.png)