Airlink AICN777W User Manual - Page 12
Step 2, Step 3 - manual
UPC - 658729087408
View all Airlink AICN777W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step 2 Select the IP Camera you want to configure from the list and click on the Change IP button. Note: If the Camera's IP address does not show up in the window, make sure the camera is properly connected to the same network as your computer is, and then click on the Search button. Step 3 You may accept the suggested Static IP, or you can manually change the last 3-digit number of the IP Address, in case the suggested address is already being used by another device in the same network. Alternatively, if your router's DHCP server is enabled, you can select DHCP, and the router will automatically assign a dynamic IP address to your camera. Enter "admin" for both ID and password, and click Change. - 11 -
- 11 -
Step 2
Select the IP Camera you want to configure from the list and click on the
Change IP
button.
Note
: If the Camera’s IP address does not show up in the window, make sure the camera is properly
connected to the same network as your computer is, and then click on the
Search
button.
Step 3
You may accept the suggested
Static IP
, or you can manually change the last 3-digit number of
the IP Address, in case the suggested address is already being used by another device in the same
network. Alternatively, if your router’s DHCP server is enabled, you can select
DHCP
, and the router will
automatically assign a dynamic IP address to your camera.
Enter
“admin”
for both
ID
and
password
, and click
Change
.