Samsung SCX 4725FN User Manual (ENGLISH) - Page 62
Add Paper &, Open/Close Door - lsu error
UPC - 635753613117
View all Samsung SCX 4725FN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Message [Low Heat Error] [LSU Error] [No Answer] [No Paper] Add Paper [Over Heat] Open Heat Error [Paper Jam 0] Open/Close Door [Paper Jam 1] Open/Close Door [Paper Jam 2] Check Inside [Stop Pressed] Add Paper & Press Start Meaning Suggested solutions There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem persists, please call for service. The receiving fax machine has not answered after several redial attempts. Try again. Make sure that the receiving machine is operational. The paper in the tray Load paper in the tray. has run out. See page 5.5. There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. Paper has jammed in the feeding area of the tray. Clear the jam. See page 13.2 and page 13.2. Paper has jammed in the fuser area. Clear the jam. See page 13.2. Paper has jammed in the paper exit area. Clear the jam. See page 13.2. Stop/Clear has been pressed during a fax transmission. Try again. You have selected Manual Feeder for Source in the printer properties. Load a sheet of paper into the manual tray and press Start to start feeding. If you have multiple pages to be printed, this message appears again. Load the next sheet and press Start. Message Cancel? 1:Yes 2:No Document Jam Enter Again Group Not Available Line Busy Load Document Memory Dial Full Memory Full Not Assigned Operation Not Assigned Meaning Suggested solutions Your machine's memory has become full while trying to store an original into memory. To cancel the fax job, press 1 to select Yes. If you want to send those pages that have been successfully stored, press 2 to select No. You should send the remaining pages later, when memory is available. The loaded original has jammed in the ADF. Clear the jam. See page 13.1. You entered an unavailable data. Enter the correct data again. You have tried to select a group dial number where only a single location number can be used. Use a speed dial number or dial a number manually using the number keypad. The receiving fax machine did not answer or the line is already engaged. Try again after a few minutes. You have attempted to set up a copy or fax operation with no document loaded into the ADF. Load a document into the ADF and try again. The fax jobs queue Cancel unnecessary fax in the memory is full. jobs in the memory. The memory is full. Delete unnecessary fax jobs and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation. The speed dial number you tried to use has no number assigned to it. Enter the number manually using the number keypad. You are in the Add Page/Cancel Job operation, but there are no jobs stored. Check the display to see if there are any scheduled jobs. 13.4