Alpine iLX-107 Owners Manual - Page 14

Camera Operation (Optional) 2 Touch [Guide Off] on the Rear camera display screen. The guide disappears, and then the [Guide Off] switch changes to [Guide On]. 3 Touch [Guide On] to turn on the guide. The video from an optional camera can be viewed from this head unit's display. Depending on your camera, please choose the camera type first. For details, refer to "Setting the Camera Input" (page 22). Front camera: When a HCE-C212F is connected, conditions in front of the vehicle, such as objects, people and other hazards, can be seen. Rear camera: If a HCE-C252RD/HCE-C155/HCE-C125, etc., camera is connected, when the vehicle is reversed, the rear camera view (guide marks for vehicle width and available distance) is displayed automatically on the screen of this unit. Side camera: If a side camera is connected, you can check for obstacles in the blind spot on the passenger side. You can adjust the quality of the camera image. Setting items: Brightness / Color / Contrast Refer to "Display Setup Operation" (page 19). Rear Camera Operation Set "Camera" to "Rear". Refer to "Setting the Camera Input" (page 22). Displaying the rear view video while the car is in reverse 1 Shift the gear lever to the reverse (R) position. The rear view image is displayed while the car remains in reverse. 2 If you shift the gear lever to a position other than reverse (R), the monitor returns to the previous screen. • Never depend solely on the camera when backing up. Always turn and look and only use the camera for additional assistance. • The Reverse wire must be properly connected for this function to be effective. Adjusting the Caution Display Location 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. • After a 5-second time-out, the operation screen returns to the camera display screen. 2 Touch [Caution ↑] or [Caution ↓]. • For each touch, the caution location moves to the top or bottom of the screen. Calling the Adjusted Values of the Camera You can call the preset values of the camera in "Display Setup" (page 20). 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. After a 5-second time-out, the operation screen returns to the camera display screen. 2 Touch [Preset]. About the Rear Camera Guide To display the guide, set "Guide Display On/Off Setting" (page 14) to On. Also, to adjust the guide, refer to "Adjusting the Rear Camera Guide" (page 23). You can also turn off the guide in the Rear camera display screen. Indication mark meaning When the car is put into reverse gear, the monitor switches to the rear view camera image. Guides appear to help visualize the car's width and distance from the rear bumper. Display the Rear View Video Manually 1 Press the Home button. The Home screen is displayed. 2 Touch [Camera]. Guide Display On/Off Setting 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. • After a 5-second time-out, the operation screen returns to the camera display screen. 1 Car width extension marks (red, yellow and green in order of distance) If properly calibrated, the marks indicate the car's width. This helps guide the car's path when backing up in a straight line. The marks represent the distance from the rear of the car (at the end of the bumper). 14-EN