Alpine iLX-107 Owners Manual - Page 20

Saving and calling the adjusted picture quality When adjusting Camera, you can store the settings made for "Adjusting Brightness, Color, and Contrast". Setting item: Preset1 / Preset2 1 After completing "Adjusting Brightness, Color, and Contrast" (page 19), touch and hold [Preset1] or [Preset2] to save the settings. 2 Touch [Preset1] or [Preset2] to call the saved settings. General Setup General Setup Operation To display the General Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Release the parking brake. (For safety, release the parking brake while depressing the foot brake pedal). 3 Engage the parking brake again. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the General mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the General mode screen." The following steps 1 to 4 are common operations to each "Setting item" of General Setup. Refer to each section for details. 1 Touch [ ] on the Home screen. The Setup main screen is displayed. 2 Touch [General]. The General Setup screen appears. 3 Touch [ ] or [ ] etc., of the desired item to change its setting. For items that have " ," touch the item to display the screen for the next hierarchy. 4 Touch [ ] to return to the main application screen. Touch [ ] to return to the previous screen. • Immediately after changing the settings of General Setup (While the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. Time Setting Setting the Clock Display You can select the clock display type, 12-hour or 24-hour, depending on your preference. Setting item: Clock Mode Setting contents: 12h (Initial setting) / 24h Setting the Time Setting item: Clock Adjust Additional items: Hour / Minute Setting contents: 1-12 or 0-23 / 0-59 Hour: Adjust the hour. Minute: Adjust the minute. • Touch and hold [ ] or [ ] to run through a change sequence automatically. Setting the Daylight Saving Time Setting item: Daylight Saving Setting contents: ON / OFF (Initial setting) ON: OFF: Turn Daylight Saving Time mode ON. The time advances by one hour for areas observing Daylight Saving Time. Return to the ordinary time. Language Setting Setting the Menu Language The Setup menu, feedback information, etc. for this unit can be changed to appear in the selected language. Setting item: Language Setting contents: • Touch [OK] to confirm the language and display the screen in the specified language. Setting items: Time / Language / Text Scroll / Touch Sound Feedback / Mute while backing up / Screen / Lighting / About / Demo mode • Depending on the item, repeat step 3. • Depending on the setting, displayed items may differ. 20-EN