Alpine iLX-107 Owners Manual - Page 29

Specifications - update

Page 29 highlights

Audio/Visual Connected USB Device is not supported. • An iPhone that is not supported by the unit is connected. - Connect an iPhone that is supported by the unit. - Reset the iPhone. • A USB device that is not supported by the unit is connected. - Attempt to connect another Flash Memory device. • Communication error. - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the iPhone and the unit, using the Lightning to USB Cable. - Check the display by reconnecting between the Flash Memory device and the unit. • Caused by the iPhone Software Version not being compatible with this unit. - Update the iPhone Software Version to be compatible with this unit. • The iPhone is not verified. - Change another iPhone. iDataLink CAN Communication error • Communication error. - Check the iDataLink module connection. Specifications MONITOR SECTION Screen Size 7.0" LCD Type Transparent type TN LCD Operation System TFT active matrix Number of Picture Elements 1,152,000 pcs. (800 × 480 × 3 (RGB)) Effective Number of Picture Elements 99% or more Illumination System LED FM TUNER SECTION Tuning Range 87.7 - 107.9 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 60 dB Stereo Separation 35 dB Capture Ratio 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530 - 1,710 kHz 22.5 µV/27.0 dBf USB SECTION USB requirements USB 1.1/2.0 GENERAL Power Requirement 14.4 V DC Operating temperature (11-16 V allowable) -4°F to +140°F (-20°C to + 60°C) Power Output 18 W RMS × 4 • Power output: measured at 4 Ohms and ≤ 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Weight Audio output level 1.23 kg (2 1bs 11 oz) Preout (Front, Rear): 2V/10k ohms (max.) Preout (Subwoofer): 2V/10k ohms (max.) CHASSIS SIZE Width Height Depth 178 mm (7") 100 mm (3-7/8") 155 mm (6-1/8") • Due to continuous product improvement, specifications and design are subject to change without notice. • The LCD panel is manufactured using an extremely high precision manufacturing technology. Its effective pixel ratio is over 99.99%. This means that there is a possibility that 0.01% of the pixels could be either always ON or OFF. 29-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

29
-EN
Audio/Visual
Connected USB Device is not supported.
An iPhone that is not supported by the unit is connected.
-
Connect an iPhone that is supported by the unit.
-
Reset the iPhone.
A USB device that is not supported by the unit is connected.
-
Attempt to connect another Flash Memory device.
Communication error.
-
Turn the ignition key off, and then set to ON again.
-
Check the display by reconnecting between the iPhone and the
unit, using the Lightning to USB Cable.
-
Check the display by reconnecting between the Flash Memory
device and the unit.
Caused by the iPhone Software Version not being compatible
with this unit.
-
Update the iPhone Software Version to be compatible with this
unit.
The iPhone is not verified.
-
Change another iPhone.
iDataLink
CAN Communication error
Communication error.
-
Check the iDataLink module connection.
Specifications
MONITOR SECTION
FM TUNER SECTION
AM TUNER SECTION
USB SECTION
GENERAL
Power output: measured at 4 Ohms and
1% THD+N
S/N: 80 dBA (reference: 1 W into 4 Ohms)
CHASSIS SIZE
Due to continuous product improvement, specifications and design
are subject to change without notice.
The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
Screen Size
7.0"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements
1,152,000 pcs. (800 × 480 × 3
(RGB))
Effective Number of Picture Elements
99% or more
Illumination System
LED
Tuning Range
87.7 – 107.9 MHz
Mono Usable Sensitivity
9.3 dBf (0.8 μV/75 ohms)
50 dB Quieting Sensitivity
13.5 dBf (1.3 μV/75 ohms)
Alternate Channel Selectivity
80 dB
Signal-to-Noise Ratio
60 dB
Stereo Separation
35 dB
Capture Ratio
2.0 dB
Tuning Range
530 – 1,710 kHz
Sensitivity (IEC Standard)
22.5 μV/27.0 dBf
USB requirements
USB 1.1/2.0
Power Requirement
14.4 V DC
(11–16 V allowable)
Operating temperature
-4°F to +140°F
(-20°C to + 60°C)
Power Output
18 W RMS × 4
Weight
1.23 kg (2 1bs 11 oz)
Audio output level
Preout (Front, Rear):
2V/10k ohms (max.)
Preout (Subwoofer):
2V/10k ohms (max.)
Width
178 mm (7")
Height
100 mm (3-7/8")
Depth
155 mm (6-1/8")