Alpine iLX-107 Owners Manual - Page 17

• Alpine TuneIt App is downloadable from Apple's App Store. • Time Correction, Crossover and Parametric EQ can be set only through the Alpine TuneIt App. • Also refer to "Applying Alpine TuneIt App" on page 10. Adjusting Balance (Between Left and Right) Adjust the right and left speaker volumes. Setting item: Balance Setting contents: L (left) 15 to R (right) 15 (Initial setting: 0) Adjusting Fader (Between Front and Rear) Adjust the front and rear speaker volume. Setting item: Fader Setting contents: F (front) 15 to R (rear) 15 (Initial setting: 0) Setting the Bass Level You can emphasize or weaken the bass level. Setting item: Bass Setting contents: -7 to +7 (Initial setting: 0) • The function is disabled when Defeat is set to "ON". • The function is disabled when Bass Engine SQ is set to "ON". Setting the Treble Level You can emphasize or weaken the treble level. Setting item: Treble Setting contents: -7 to +7 (Initial setting: 0) • The function is disabled when Defeat is set to "ON". • The function is disabled when Bass Engine SQ is set to "ON". Setting the Subwoofer Turning Subwoofer ON/OFF If an optional subwoofer is connected to the unit, make the following setting. Setting item: Subwoofer Setting contents: ON / OFF (Initial setting) • The function is disabled when Bass Engine SQ is set to "ON", and the Bass Engine SQ parameter downloaded from Alpine TuneIt App is applied. Adjusting the Subwoofer Level You can set the Subwoofer level when a Subwoofer is connected. Setting item: Subwoofer Level Setting contents: 0 to 15 (Initial setting: 0) • If the Subwoofer setting is "OFF", the setting cannot be set. • The function is disabled when Bass Engine SQ is set to "ON". Setting the Subwoofer Phase The subwoofer output phase is toggled Subwoofer Normal (0°) or Subwoofer Reverse (180°). Setting item: Subwoofer Phase Setting contents: 0° (Initial setting) / 180° • If the Subwoofer setting is "OFF", the setting cannot be set. Setting the Bass Engine SQ Bass Engine SQ is used to easily add impact of varying levels to your music. Using the different levels available, the Bass impact can be adjusted for different types of music. • Using the Alpine TuneIt App, you can download the optimal Bass Engine SQ tuning data for your speaker system. Turning the Bass Engine SQ ON/OFF Set to "ON" to use the Bass Engine SQ function. Setting item: Bass Engine SQ Setting contents: OFF (Initial setting) / ON • The function is disabled when Defeat is set to "ON". Setting the Bass Engine SQ Type You can set your favorite Bass Engine SQ type. Setting item: Bass type Setting contents: Standard (Initial setting) / Punch / Low Bass / Mid Bass / Rich Standard: A mild low-end boost to overcome road noise. Punch: A heavier boost with more low-end impact (punch). Low Bass:Enhance the very low bass to give a much heavier presence without the punchy mid-bass. Mid Bass: Focused more on mid-bass for systems with smaller subwoofers. Rich: Add boost to all low-end bands for a more bass-filled sound. • The function is disabled when Defeat is set to "ON". • The function is disabled when Bass Engine SQ is set to "OFF". 17-EN