Arlo Essential Wired Video Doorbell User Manual - Page 50
Adjust the flicker setting, Optional SmartHub and Base Station settings
![]() |
View all Arlo Essential Wired Video Doorbell manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Essential Video Doorbell Wired Adjust the flicker setting The combination of certain artificial light sources and the Video Doorbell's camera shutter speed might cause flickering or dark lines in recorded video. The default setting is Auto (60 Hz), but you can change this setting to 50 Hz. 1. Open the Arlo app. 2. Tap the gear icon next to the doorbell. 3. Tap Flicker Adjustment. 4. Tap a setting. Optional SmartHub and Base Station settings You can connect your Arlo Video Doorbell directly to the 2.4 GHz WiFi network of your router. If you prefer, you can connect your doorbell with a SmartHub model VMB5000 or VMB4540 or Base Station with Siren model VMB4500 or VMB4000. This section describes the SmartHub and base station settings. Change your SmartHub or base station name 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Tap the SmartHub or base station. 4. Tap Edit next to the name. 5. Enter a new name. 6. Tap Save. Restart your SmartHub or base station 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Tap the SmartHub or base station. 4. Scroll down and tap Restart. Change Your Settings 50 User Manual
![](/manual_guide/products/arlo-essential-wired-video-doorbell-user-manual-9e2f160/50.png)