Arlo Essential Wired Video Doorbell User Manual - Page 51
View device information, Turn the base station siren on and off, Base station siren button
View all Arlo Essential Wired Video Doorbell manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Essential Video Doorbell Wired Turn the base station siren on and off By default, the base station siren is set to the loudest volume, which is over 100 decibles. You can set up motion detection rules to trigger the base station siren and select the siren volume level when you set up the rule. The base station siren settings are Loud, Very Loud, and Extremely Loud. See Add a rule with a base station siren trigger on page 56. WARNING: The loudest siren setting, which is the default for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage. To turn the base station siren on and off using the Arlo app 1. Open the Arlo app. 2. Tap Turn Siren ON. 3. Tap Yes to confirm that you want to turn on the siren. Base station siren button The Base Station with Siren model VMB4000 has a button located on the top. WARNING: The loudest siren setting, which is the default for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage. Pressing this button turns the siren on and off. View device information You can view the firmware version, hardware version, and the serial number. 1. Open the Arlo app. Change Your Settings 51 User Manual