Arlo Essential Wired Video Doorbell User Manual - Page 90

New to Arlo?, Reset

Get Arlo Essential Wired Video Doorbell PDF manuals and user guides View all Arlo Essential Wired Video Doorbell manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

Essential Video Doorbell Wired To reset a base station: 1. Use a straightened paper clip to press and hold the Reset button for about 10 seconds. The base station resets. The LED behavior during the reset depends on your base station model. • The Base Station VMB4500 has one LED on the front. The LED blinks alternating blue and amber. • The Base Station VMB4000 has three LEDs on the front. The LEDs blink amber. The base station reboots. 2. Wait for the base station to finish rebooting before you unplug it, turn it off, or use the Arlo app to set it up. 3. To add the Base Station with Siren to your Arlo account and set it up, open the Arlo app and tap New to Arlo?. 4. Follow the setup instructions. If your Arlo cameras were synched or paired to the SmartHub, you might need to synch or pair the cameras to the base station again. Troubleshooting 90 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
90
Troubleshooting
Essential Video Doorbell Wired
User Manual
To reset a base station:
1.
Use a straightened paper clip to press and hold the
Reset
button for about 10 seconds.
The base station resets.
The LED behavior during the reset depends on your base station model.
•
The Base Station VMB4500 has one LED on the front. The LED blinks alternating blue
and amber.
•
The Base Station VMB4000 has three LEDs on the front. The LEDs blink amber.
The base station reboots.
2.
Wait for the base station to finish rebooting before you unplug it, turn it off, or use the Arlo
app to set it up.
3.
To add the Base Station with Siren to your Arlo account and set it up, open the Arlo app
and tap
New to Arlo?
.
4.
Follow the setup instructions.
If your Arlo cameras were synched or paired to the SmartHub, you might need to synch or
pair the cameras to the base station again.