Asus AP1710-E1 AP1710-E1 English version manual - Page 46
Installing a Serial ATA HDD to the first hard disk drive cage, stalling a Serial ATA HDD to
View all Asus AP1710-E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
I nstalling a Serial ATA HDD to the first hard disk drive cage To install a Serial ATA hard disk drive to the first hard disk drive cage: 1. Follow instructions 1 to 6 of the previous section. 2. Connect the 15-pin SATA power plug to the power connector at the back of the drive. 3. Connect the other end of the SATA power cable to a 4-pin plug (female) from the power supply unit. 4. Connect one end of the supplied 7-pin SATA cable to the SATA connector at the back of the drive, then connect the other end to a SATA connector on the motherboard. Refer to the motherboard user guide for the location of the SATA connectors. 2-22 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
Chapter 2:
Hardware setup
Chapter 2:
Hardware setup
Chapter 2:
Hardware setup
Chapter 2:
Hardware setup
2-22
2-22
2-22
2-22
2-22
In
In
In
In
Installing a Serial ATA HDD to the first hard disk drive cage
stalling a Serial ATA HDD to the first hard disk drive cage
stalling a Serial ATA HDD to the first hard disk drive cage
stalling a Serial ATA HDD to the first hard disk drive cage
stalling a Serial ATA HDD to the first hard disk drive cage
To install a Serial ATA hard disk drive to the first hard disk drive cage:
1.
Follow instructions 1 to 6 of the previous section.
2.
Connect the 15-pin SATA power
plug to the power connector at
the back of the drive.
3.
Connect the other end of the
SATA power cable to a 4-pin
plug (female) from the power
supply unit.
4.
Connect one end of the supplied
7-pin SATA cable to the SATA
connector at the back of the
drive, then connect the other
end to a SATA connector on the
motherboard. Refer to the
motherboard user guide for the
location of the SATA
connectors.