Asus AP1710-E1 AP1710-E1 English version manual - Page 50
Installing a long expansion card
View all Asus AP1710-E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2.8.2 Installing a long expansion card The A S 4 , A A 4, and A I 4 models support long expansion cards. Refer to the instructions in this section to install a long expansion card. To install a long expansion card: 1. Remove the plastic card lock opposite the slot where you wish to install the expansion card. Release the card lock by pressing the center tabs and pushing outward. Set the card lock aside for later use. 2. Tilt the long card as shown while aligning the metal bracket with the slot opening on the rear panel. 3. When the card is inside the chassis, push down the end of the card until it is level with the PCI slot. 4. Push the card connector into the PCI slot until it is securely seated. 5. When the card is in place, secure it with the plastic card lock that you removed earlier. 2-26 Chapter 2: Hardware setup