Asus AP1710-S5 AP1710-S5 English Manual - Page 43

Removable components

Page 43 highlights

2.9 Removable components You may need to remove previously installed components when installing or removing system devices. This section describes how to remove the following components: 1. Chassis fan 2. HDD blower 3. Floppy disk drive 4. Power supply modules 5. Power supply case 6. Roller wheels 2.9.1 Chassis fan To remove the 12-cm chassis fan: 1. Disconnect the 3-pin fan cable from the connector on the motherboard. 2. Use a flat screwdriver to push the pin locks on the four corners of the fan from the inside of the chassis. Pin lock (tail-end) 3. Pull out the pin locks from the rear panel. 4. Remove the chassis fan. ASUS AP1710-S5 user guide 2-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

2-25
ASUS AP1710-S5 user guide
2.9
Removable components
You may need to remove previously installed components when installing
or removing system devices. This section describes how to remove the
following components:
1.
Chassis fan
2.
HDD blower
3.
Floppy disk drive
2.9.1
Chassis fan
To remove the 12-cm chassis fan:
1.
Disconnect the 3-pin fan cable
from the connector on the
motherboard.
2.
Use a flat screwdriver to push
the pin locks on the four corners
of the fan from the inside of the
chassis.
3.
Pull out the pin locks from the
rear panel.
4.
Remove the chassis fan.
Pin lock (tail-end)
4.
Power supply modules
5.
Power supply case
6.
Roller wheels