Asus ExpertCenter E500 G9 E500 G9 English User Manual - Page 46

Wait until the light goes out, indicating that the BIOS updating process is completed., Updating BIOS

Page 46 highlights

Refer to section Onboard LEDs for more information of the FlashBack™ LED. 5. Wait until the light goes out, indicating that the BIOS updating process is completed. For more BIOS update utilities in BIOS setup, refer to the section Updating BIOS in Chapter 4. • Do not unplug portable disk, power system, or short the CLRTC header while BIOS update is ongoing, otherwise update will be interrupted. In case of interruption, please press and hold the BIOS_FLBK button for 3 seconds again to restart the process. • If the light flashes for five seconds and turns into a solid light, this means that the BIOS FlashBack™ is not operating properly. Please check the following when this happens: - The USB drive should only contain a single partition. - The USB drive should be formatted to a FAT32, FAT16, or NTFS filesystem. - The BIOS filename should be correctly named, and in the root folder of the USB drive. - If the problem persists, the USB drive may not be compatible, please try another USB drive of a different brand/model. Then retry the flashback by pressing the BIOS FlashBack™ button for three seconds until the FlashBack™ LED starts to blink. 2-28 Chapter 2: Hardware Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186

Chapter 2: Hardware Setup
2-28
For more BIOS update utilities in BIOS setup, refer to the section
Updating BIOS
in
Chapter 4.
5.
Wait until the light goes out, indicating that the BIOS updating process is completed.
Refer to section
Onboard LEDs
for more information of the FlashBack™ LED.
Do not unplug portable disk, power system, or short the CLRTC header while BIOS
update is ongoing, otherwise update will be interrupted. In case of interruption, please
press and hold the BIOS_FLBK button for 3 seconds again to restart the process.
If the light flashes for five seconds and turns into a solid light, this means that the
BIOS FlashBack™ is not operating properly. Please check the following when this
happens:
-
The USB drive should only contain a single partition.
-
The USB drive should be formatted to a FAT32, FAT16, or NTFS filesystem.
-
The BIOS filename should be correctly named, and in the root folder of the USB
drive.
-
If the problem persists, the USB drive may not be compatible, please try another
USB drive of a different brand/model.
Then retry the flashback by pressing the BIOS FlashBack™ button for three seconds
until the FlashBack™ LED starts to blink
.